FINE CONTROL OF HZSM-5’S PORE-OPENING SIZE BY A NEW CVD METHOD

A new CVD method without vacuum condition(CVDWV)was designed in this study,ithad been found that by modifying the flow rate of the carrier gas(N_2)and the temperature of sur-face reaction,silicon saturator and sample tube,the amount of silica deposited on the external sur-face of the zeolite could be precisely controlled,The changes in the physicochemical properties ofzeolite,such as pore-opening size,acidity and reaction property were investigated.The results ob-tained showed that:modification of the improved CVD method did not change the internal structureand acidity of the zeolite,but could bring about significant change of pore-opening size and reactionproperty as desired.     

功能梯度Ni-P合金镀层在酸性和碱性介质中的电化学腐蚀行为

通过电镀法制备了功能梯度N i-P合金镀层。SEM形貌照片显示,梯度层截面致密、无明显的宏观界面;400℃热处理前后梯度层中P含量分布曲线表明,从界面到镀层表面,P含量逐渐降低,呈现明显的梯度变化。在质量分数分别为10%的盐酸和氢氧化钠介质中的动电位极化曲线和电化学交流阻抗谱分析、含氯酸性介质中的腐蚀前后的表面形貌照片表明,与硬铬镀层相比,经过400℃热处理后的梯度N i-P合金镀层的腐蚀电位提高了600 mV以上,腐蚀电流分别降低了2个和1个数量级,阻抗值亦明显提高,而且,其腐蚀前无裂纹,腐蚀后仅发生轻微的点蚀现象。梯度N i-P合金镀层较硬铬镀层表现出更优异的耐蚀性能。     

空气搅拌对n-Al_2O_3/Ni–P化学复合镀层性能的影响

针对纳米化学复合镀施镀过程中纳米颗粒分散问题,设计并研制了可控制空气流量的搅拌装置,研究了空气搅拌强度对n-Al2O3/Ni–P化学复合镀层性能的影响。结果表明,空气搅拌强化了纳米颗粒在镀层中的分散。搅拌强度为80L/h时,纳米化学复合镀层最致密,为典型的胞状结构,镀层中纳米Al2O3含量达到1.13%,镀层硬度可达628HV,镀层孔隙率等级为9级。极化曲线显示,纳米化学复合镀层的自腐蚀电流(9.963μA/cm2)远远小于Ni–P镀层,具有更优异的耐蚀性。     

化学镀镍复合配位剂的研究

采用对比试验和正交试验,以镀速、孔隙率、镀液稳定性和镀层硬度为评价指标,研究了单一配位剂及复合配位剂对镀液和镀层性能的影响,得到了复合配位剂的最优组合:8.4g/L乳酸,6g/L苹果酸,9g/L柠檬酸,8g/L丁二酸,1g/L丙酸。采用该复合配位剂的工艺配方可提高镀液使用寿命,获得性能优良的镀层。     

Initial Deposition of Colloidal Particles on a Rough Nanofiltration Membrane

The initial rate of colloid deposition onto semi‐permeable membranes is largely controlled by the coupled influence of permeation drag and particle‐membrane colloidal interactions. Recent studies show that the particle‐membrane interactions are subject to immense local variations due to the inherent morphological heterogeneity (roughness) of reverse osmosis (RO) and nanofiltration (NF) membranes. This experimental investigation reports the effect of membrane roughness on the initial deposition of polystyrene latex particles on a rough NF membrane during cross flow membrane filtration under different operating pressures and solution chemistries. Atomic force microscopy was used to characterize the roughness of the membrane and observe the structure of particle deposits. At the initial stages of fouling, the AFM images show that more particles preferentially accumulate near the “peaks” than in the “valleys” of the rough NF membrane surface.     

内蒙古花敖包特银铅锌矿床成矿特征研究与物化探勘查进展

花敖包特铅锌银矿床是近年来新发现的位于大兴安岭南段西坡银多金属成矿带上一重要矿床。自2000年通过土壤地球化学测量与激电测量发现本矿床以来,相继对该矿床进行了一系列地质基础理论研究以及有效勘查,包括通过各种地质方法揭示矿体成矿规律、探查矿体控制要素,运用物探勘查技术（高精度磁测、瞬变电磁法以及激电测量等）、化探勘查技术（土壤地球化学测量以及深穿透地球化学技术等）以及三维地质建模技术对矿区深部及其外围进行勘查,取得了一些新的认识,通过这些勘查研究显示本矿床在深部和外围仍具有良好的成矿前景。     

模具沉积层应变的模拟

为分析沉积层应变的变化情况,并找出温度与形变的变化规律,采用有限元分析软件ANSYS计算并绘制不同时刻以及不同位置沉积层内的温度及应力应变曲线,在建立传热模型过程中考虑了金属液滴向沉积层的传热以及沉积层向系统外的热量散失等问题．采用在厚度方向以微小层逐层叠加来模拟涂层的增厚,并以此为基础构造沉积层有限元计算模型,应用单元生与死逐层激活层单元参与计算过程．实现移动边界以充分模拟真实的喷涂沉积过程．通过分析不同时刻以及不同位置沉积层内的应力应变曲线,获得了沉积层应力应变变化规律．结果表明,沉积层内存在残余塑性应变,且沉积层与母模接触部位等效应力最大,是最易翘曲的地方,验证了沉积层失稳的一般形式．     

Reserve estimation of an open pit mine under price uncertainty by real option approach

Reserve estimation is a key to find the correct NPV in a mining project. The most important factor in reserve estimation is the metal price. Metal price fluctuations in recent years were exaggerated, and imposed a high degree of uncertainty to the re-serve estimation, and in consequence to the whole mine planning procedure. Real option approach is an efficient method of deci-sion making in the uncertain conditions. This approach has been used for evaluation of defined natural resources projects until now. This study considering the metal price uncertainty used real option approach to prepare a methodology for reserve estimation in open pit mines. This study was done on a copper cylindrical deposit, but the achieved methodology can be adjusted for all kinds of deposits. This methodology was comprehensively described through the examples in such a manner that can be used by the mine planners.     

江西金山金矿控矿韧性剪切带的递进变形成矿机理：显微构造证据

在对江西金山金矿控矿韧性剪切带内岩石和矿石的显微构造分析基础上,对剪切带的递进变形与成矿机理进行探讨。研究发现,金山韧性剪切带在韧性—韧脆性递进剪切变形过程中发育3类石英脉透镜体或石香肠构造;剪切压溶和缝合线构造在金山韧性剪切带内强烈发育;扩散蠕变机制是金山韧性剪切带重要的变形机制。大量缝合线构造的形成增强了岩石的孔隙度和渗透率,有利于流体的迁移和沉淀。金山剪切带内变形和成矿作用经历了漫长复杂的地质过程,粗略估算至少跨过了72Ma。在递进剪切变形过程中经历多种构造变形机制,如经历了以透人性片理为代表的韧性剪切变形机制到以“次级剪切面”构造网络为代表的韧-脆性剪切变形机制的转换。剪切带的递进剪切变形自始至终控制着金的成矿作用过程,没有递进剪切变形也就没有金山金矿的形成。